N8358 Series Eight-Chiteshi Inorongwa Bhatiri Simulator
N8358 is a programmable battery simulator with low power, high accuracy and multi-channel. By adopting dual-quadrant design, the current can be charged and discharged, which can satisfy the needs of BMS test. N8358 standalone supports up to 8 channels, which can offer four-station test and meet the demands of ATE test in consumer electronics. The voltage & current of each channel can be set on application software. N8358 software is easy to use, which can meet demands of battery simulators in multi-channel, multi-parameter, and complex test environments. N8358 software supports multi-channel batch operation. Data and curve for each channel can be displayed. Meanwhile, data analysis and report function are supported.
●Voltage range: 0-5V/0-6V/0-15V
●Current range: -1~1A/-2~2A/-3~3A/-5~5A
●Single device up to 8 channels
●Remote sense for high output accuracy
●Voltage ripple noise low to 2mVrms
●Dual LAN port and RS232 interface
●Active/passive balancing test
●μA level current measurement
●Standard 19 inch 2U, available for rack installation
●Fault simulation: short circuit, open circuit, reverse polarity
●Each channel isolated, series connection available
●Voltage accuracy up to 0.01%+1mV
●Battery maintenance device test
●Portable consumer electronics R&D and production, such as mobiles, bluetooth earphones, smartwatch, etc.
●Electric tools manufacturing test, such as electric screw driver
Mabasa & Kubatsira
Active/passive balancing test
Neye bidirectional dhizaini, yazvino yekuisa uye kuburitsa madhaidhi eimwe chiteshi inogona kuteverwa kudzorwa. Vashandisi vanogona kugadzirisa bhatiri kubhadharisa uye kuburitsa modhi, iyo inosangana zvizere nezvinodiwa zveBMS inoshanda kuenzanisa bvunzo.
Ultra-high accuracy, supporting static power consumption test
N8358 has high current accuracy, up to 1μA. By supplying power to the DUT, static power consumption of the DUT in standby mode can be intuitively tested. The unqualified products are screened out to ensure the product standby time is within the nominal range after delivery.
Ultra-high integration, built-in fault simulation
N8358 integrates 8 channels in 19-inch 2U size. Each channel has built-in positive & negative polarity short circuit, open circuit, and reverse polarity. Users can control directly on the front panel or on PC. The application of N8358 can eliminate use of external component for battery fault simulation, which can save cost and space for users.
N8358 standalone has 8 channels with each channel isolated. Each channel can be used for current input or output. In ATE (Automatic Test Equipment) test system for consumer electronics such as smart phones, Bluetooth headsets, etc., the single production line often uses four stations. During the test, four channels are used as power supply to provide high-accuracy and stable power output. The left four channels are used for battery simulation. Paired channels simulate various operation conditions to check if they can meet the built-in graph requirements. N8358 standalone can be built into a four-station test system, which greatly improves the test efficiency and saves the investment.
● Charging current test
● Static simba rekushandisa bvunzo
● Protection parameter test